HVAC apprenticeship

HVAC Apprenticeship: How to Get In, What It Pays, How Long It Takes

An HVAC apprenticeship is a paid job with classes, usually 4 to 5 years. Here's how to get in, what apprentices earn, and when you need EPA 608 certification.

The short answer

An HVAC apprenticeship is a paid job with classes. You work for an HVAC contractor under experienced technicians, take classroom instruction, and get a raise as you progress. Most programs take 4 to 5 years. Along the way you'll need EPA Section 608 certification to handle refrigerant on your own.

You can go union (the pipe trades' United Association, or the sheet metal workers' SMART) or non-union (contractor associations such as ABC and PHCC, or an employer's own program). Either way, look for a Registered Apprenticeship: paid work with a mentor, wage increases, classroom instruction and a nationally recognized credential (U.S. Department of Labor).

HVAC apprenticeship at a glance

TypicalSource
Length4–5 years (UA: typically 5)United Association, ABC Virginia
On-the-job training8,000 hours at UA Local 290, Area I HVAC JATC and ABC VirginiaUA Local 290 standard, ABC Virginia
Classroom144–216 hours a year at the programs we checkedArea I HVAC JATC, UA Local 290
Starting pay40–55% of the journey-level rate, rising to 90% or moreUA Local 290, Area I HVAC JATC, SMART/SMACNA standard
CertificationEPA Section 608, required to work on refrigerant unsupervisedEPA
HVAC technicians' median pay$61,010 a year (May 2025)BLS

The ways in, compared

RouteWho runs itHow you get inCost to you
Union pipe trades (UA)A United Association local and its joint apprenticeship committee; HVACR is one of its tracksContact your local through the UA local finder; e.g. Local 290 uses math and journey assessments and a structured interviewVaries; e.g. UA Local 290 charges a $35 application fee, with a waiver for low incomes
Union sheet metal (SMART)SMART and SMACNA contractors, through local training centers; HVAC and HVACR service are specialty areasApply at a local training centerSMART's training arm says little to no tuition or fees
ABC (non-union)Associated Builders and Contractors chapters run the classroom sideGet hired by a contractor first; e.g. ABC Virginia takes only apprentices employed by licensed HVAC-R contractorsTuition, with a discount at member employers (ABC Virginia)
PHCC (non-union)PHCC Academy's online HVACR courses, one course per yearEnroll through a PHCC state chapter partner; on-the-job training is with a participating employerSet by the program and employer
Employer programAn HVAC contractor with its own registered apprenticeshipGet hired as an apprentice; search the Department of Labor apprenticeship finderVaries

Trade school is another path. The BLS says HVAC technicians typically need a postsecondary nondegree award; programs last 6 months to 2 years and lead to a certificate or associate's degree, and some technicians train through an apprenticeship instead (BLS).

Requirements to apply

Requirements are set by each program. Two Oregon HVAC programs with published 2023–2026 standards ask for:

  • Age: at least 18 to be registered (UA Local 290 accepts applications at 17)
  • A high school diploma or GED
  • One year of high school algebra, or equivalent, with a C or better (or a math placement test)
  • At UA Local 290, passing its math and journey assessments (Area I lists no testing)

Employers may also require a valid driver's license and a drug or alcohol test (Area I HVAC JATC, UA Local 290). ABC Virginia asks that you be 18 or older, have a diploma or GED, and be able to read and write in English (ABC Virginia).

EPA Section 608: when you need it

Federal law requires technicians who maintain, service, repair or dispose of equipment that could release refrigerant to be certified under Section 608 of the Clean Air Act (EPA). There are four types:

TypeCovers
Type ISmall appliances
Type IIHigh- and very high-pressure appliances (except small appliances and vehicle AC)
Type IIILow-pressure appliances
UniversalAll types

As an apprentice: you can work on refrigerant systems without the certificate only while closely and continually supervised by a certified technician (40 CFR 82.161), and only for two years from when you first register as an apprentice (40 CFR 82.152). Only certified technicians can buy refrigerant, with limited exceptions (EPA). The certificate never expires, so getting it early makes you more useful on day one.

You pass an EPA-approved test given by an approved certifying organization. Practice for it free with our EPA 608 practice tests.

What HVAC apprentices earn

Apprentice pay is a percentage of the journey-level rate that steps up as you log hours. Two published scales:

Hours workedUA Local 290 HVAC/R (OR/WA/CA)Area I HVAC JATC (OR)
Start40%55%
About 2,000 hours55%60–65%
About 4,000 hours65%70–75%
About 6,000 hours80%80–85%
Final period (to 8,000)90%90%

At UA Local 290 the average journey-level wage was $60.77 an hour (April 2025), so 40% works out to about $24.31 an hour and 90% to about $54.69 (UA Local 290 standard). The national sheet metal standard starts at 50% and reaches 100% at completion (SMART/SMACNA standard). The median HVAC technician earned $61,010 in May 2025, and the BLS projects 11% growth from 2025 to 2035 with about 40,600 openings a year (BLS). Compare pay where you live on our HVAC technician salary pages.

From apprentice to licensed

Some states and localities license HVAC technicians, and apprenticeship hours or supervised experience count toward it. Two examples:

  • Texas: anyone assisting a licensed air conditioning and refrigeration contractor must register as a technician (TDLR). You qualify for the voluntary certified technician exam after 24 months of supervised work or a 2,000-hour approved program (TDLR), and a contractor license needs 48 months of supervised experience in the past 72 (or 36 of the past 48 if you've held a technician certification for a year) (TDLR).
  • Connecticut: the D-2 journeyperson exam requires completing a registered apprenticeship or equivalent experience and training (Connecticut DCP).

Check your state on our licensing by state pages.

HVAC apprenticeships by state

State guides list the programs, when they take applications and what apprentices earn:

Where to find an opening

Many non-union programs start with a job: apply to HVAC contractors near you and ask whether they sponsor apprentices.

Frequently asked questions

How long is an HVAC apprenticeship?

Usually 4 to 5 years. The United Association says its apprenticeships typically last five years, ABC Virginia's HVAC-R program is four years or 8,000 hours, and the national sheet metal standard runs about 3 to 5 years.

Do HVAC apprentices get paid?

Yes. A registered apprenticeship is a paid job, and your wage rises as you progress. Pay is set as a percentage of the journey-level rate.

How much do HVAC apprentices make?

It depends on the program and area. The UA Local 290 HVAC/R program in Oregon, southwest Washington and northwest California starts at 40% of a $60.77 average journey wage and steps up to 90%; the national sheet metal standard starts at 50%.

Do I need EPA 608 certification to start an HVAC apprenticeship?

Not on day one. A registered apprentice may work on refrigerant systems while closely and continually supervised by a certified technician, but only for two years from first registering, and only certified technicians can buy refrigerant, with limited exceptions. Plan to get certified early.

Does EPA 608 certification expire?

No. The EPA says Section 608 technician certification credentials do not expire.

What do I need to apply for an HVAC apprenticeship?

Commonly a minimum age of 18, a high school diploma or GED, and a year of algebra with a C or better, as at the two Oregon HVAC programs we checked. Some employers also require a driver's license and a drug test.

Do I need a job before I can start?

For many non-union programs, yes. ABC Virginia limits its HVAC-R training to apprentices employed by licensed HVAC-R contractors, and PHCC's online program needs a participating employer for the on-the-job training.

Is HVAC a growing field?

Yes. The Bureau of Labor Statistics projects 11% employment growth from 2025 to 2035, much faster than average, with about 40,600 openings a year.

Sources

U.S. Bureau of Labor Statistics, Occupational Outlook Handbook: HVACR mechanics and installers; U.S. Department of Labor: Registered Apprenticeship; United Association: apprenticeship; UA Local 290 HVAC/R Technician standard (Oregon BOLI, rev. Jan 2026); Area I HVAC JATC standard (Oregon BOLI); SMART/SMACNA national guideline standards (DOL Bulletin 2026-07); Sheet Metal ITI; ABC Virginia HVAC-R application 2026–27; PHCC Academy; EPA: Section 608 technician certification; EPA: refrigerant sales restriction; 40 CFR 82.161; 40 CFR 82.152; Texas TDLR; Connecticut DCP.

BIG WORKS is not affiliated with the EPA, any union, contractor association or government agency. Program details change; confirm with the program before you apply.

Last checked November 12, 2026.