The short answer
In Oregon, HVAC apprenticeships are approved by the Oregon State Apprenticeship and Training Council and registered with the Bureau of Labor and Industries (BOLI). As of November 19, 2026, one program in the table below publishes an application window that covers today: Central Oregon Sheet Metal JATC, a sheet metal program, from November 1, 2026 to April 30, 2027 (public notice). BOLI lists Area I HVAC JATC in Portland and Klamath Basin HVAC JATC as accepting applications, without dates. The HVAC/R apprenticeship is 8,000 hours on the job, which Chemeketa Community College describes as a four-year program (Chemeketa).
The other HVAC/R programs are closed or not accepting applications for now, including UA Local 290, Mid-Valley HVAC JAC in Salem and the Lane and Douglas county program. BOLI's baseline is 17 to apply and 18 to begin, a high school diploma or GED, and one year of algebra with a C (Oregon BOLI). You earn a wage while you train. The registered HVAC/R standards name the Limited Energy Technician Class B license as the license the apprenticeship leads to.
Where to apply in Oregon
State-registered programs that are open to the public, from BOLI's apprenticeship opportunities listings (HVAC/R technician, environmental control system servicer/installer, sheet metal worker). HVAC/R programs come first, then sheet metal, steamfitter and pipefitter, and related programs. Each status is the program's own where we could read one, and BOLI's listing otherwise. BOLI's listing shows no dates and sometimes differs from a program's site. We left out the Columbia Gorge JATC, a Department of Corrections program.
| Program | Area | Route | Applications (as of November 19, 2026) | Application fee |
|---|---|---|---|---|
| OR SW-WA NW-CA Plumbers & Steamfitters JATC, UA Local 290 (290 Tech) | Most of Oregon and southwest Washington; training centers in Tualatin, Springfield, Redmond, White City and Eureka | Union (UA): HVAC/R technician, steamfitter | Closed. Its site says applications are currently closed and it has no future openings planned at this time. BOLI's list differs: it shows the program as accepting applications (BOLI) | $35, non-refundable, charged to qualified applicants before assessments (waiver for incomes below 150% of the federal poverty guidelines) |
| Area I HVAC JATC (Associated Builders and Contractors Pacific Northwest) | Clackamas, Clatsop, Lane, Marion, Multnomah and Washington counties; office in Portland | Non-union (ABC): HVAC/R | BOLI lists it as accepting applications; no dates given. Phone 503-598-0522 | Not published |
| Mid-Valley HVAC JAC (Chemeketa Community College) | Benton, Clackamas, Lincoln, Linn, Marion, Multnomah, Polk and Yamhill counties; classes in Salem | Community college administered: HVAC/R technician | Closed to the public. Chemeketa says public openings are based on industry need and are announced on its page 30 days ahead. Veterans and pre-apprenticeship completers who qualify may apply at any time. BOLI lists it as not accepting applications (BOLI) | Not published |
| Area III Sheet Metal/HVAC Environmental Systems JATC | Lane and Douglas counties | Committee administered by NW Apprenticeship Services: HVAC service technician/installer, sheet metal worker | Closed. NW Apprenticeship Services shows both pools as closed. Call 541-279-1543 to be added to a notification list (NW Apprenticeship Services) | Not published |
| Rogue Valley HVAC/R JATC (Rogue Community College) | Jackson, Klamath and Josephine counties; office in White City | Community college administered: HVAC/R | BOLI lists it as not accepting applications. Phone 541-956-7184 | Not published |
| Klamath Basin HVAC JATC | Klamath and Lake counties; office in Klamath Falls | Local committee; classes at Klamath Community College: HVAC/R technician | BOLI lists it as accepting applications; no dates given. BOLI shows no website. Phone 541-783-0967 | Not published |
| Portland Sheet Metal Workers JATC, SMART Local 16 (Sheet Metal Institute) | 30 Oregon counties, including Multnomah, Marion, Lane, Deschutes and Jackson, plus Clark and Skamania counties in Washington | Union (SMART): service systems technician, sheet metal worker | Closed. The institute's apply page says application submission is currently closed. BOLI's list differs: it shows the program as accepting applications (BOLI). For the service systems technician trade, the registered standard says applicants are referred by a training agent (standard) | Not published |
| Central Oregon Sheet Metal JATC | Deschutes, Crook and Jefferson counties | Committee administered by NW Apprenticeship Services: sheet metal worker. Seven training agents, 4 in Bend and 3 in Redmond | Open now: November 1, 2026 to April 30, 2027. Applications are at nwapprenticeship.org; the notice says phone requests for applications are not accepted (public notice). Names go on the list by date received (pool letter) | Not published |
| Mid-Valley Sheet Metal Workers JAC (Chemeketa Community College) | Benton, Lane, Lincoln, Linn, Marion, Multnomah, Polk and Yamhill counties; classes in Salem | Community college administered: sheet metal worker | Closed on September 11, 2026. Chemeketa says applications were accepted February 1 to September 11. BOLI's list differs: it shows the program as accepting applications (BOLI) | Not published |
| Sheet Metal JATC (Associated Builders and Contractors Pacific Northwest) | Clackamas, Clatsop, Multnomah and Washington counties; office in Portland | Non-union (ABC): sheet metal worker | BOLI lists it as accepting applications; no dates given | Not published |
| South Central Oregon Sheet Metal JATC (Rogue Community College) | Jackson, Josephine, Klamath and Lake counties; office in White City | Community college administered: sheet metal worker | BOLI lists it as not accepting applications. Phone 541-956-7184 | Not published |
| Mid-Valley Steamfitters/Pipefitters JATC (Linn-Benton Community College) | Marion, Polk, Linn, Benton and Lincoln counties and the south half of Yamhill County | Community college administered: pipefitter | Closed. The program's application process document says the application is currently closed. BOLI lists it as not accepting applications (BOLI) | Not published |
| Eastern Washington – Northeast Oregon Pipe Trades JATC, UA Local 598 | Baker, Gilliam, Grant, Umatilla, Union, Wallowa and Wheeler counties; office in Pasco, WA | Union (UA): steamfitter | BOLI lists it as accepting applications; no dates given. Phone 509-547-6480 | Not published |
| Oregon Test, Adjust and Balance Technician JATC | Lane, Multnomah, Washington and Yamhill counties | Testing, adjusting and balancing technician (6,000 hours) | BOLI lists it as accepting applications; no dates given | Not published |
| Oregon SW Washington IUOE Local 701 Stationary Engineer JATC | Benton, Clackamas, Clatsop, Columbia, Hood River, Marion, Multnomah, Linn and Washington counties and the northern half of Yamhill County | Union (IUOE): stationary engineer. Its standard requires current employment with an approved training agent | BOLI lists it as not accepting applications | Not published |
Requirements at Oregon HVAC programs
BOLI's baseline for HVAC/R: at least 17 to apply and 18 to begin, proof of high school graduation or a GED, and at least one year of algebra with a C. Committees may add their own requirements (Oregon BOLI). What each program asks for:
| Program | Minimum age | Education and math | Tests and selection |
|---|---|---|---|
| UA Local 290 | 17 to apply, 18 to register | High school diploma or GED; one year of algebra with a C, or a placement test result beyond high school algebra | Watch a job preview video; score green or yellow on the Journey Assessment and green on the Math Assessment; panel interview. A valid email address is required |
| Area I HVAC JATC (ABC) | 18 | High school diploma, GED or international equivalent; one year of algebra with a C, or equivalent placement scores | No entrance test; structured interview; ranked on interview score plus application points (up to 75 application points). The employer may require a driver's license and a substance abuse test |
| Mid-Valley HVAC JAC (Chemeketa) | 18 | High school diploma or GED; one year of high school algebra with a C, or placement into Math 70 at Chemeketa, or Math 60 and Math 70 taken there | The employer may require a driver's license and a drug test |
| Area III HVAC (Lane and Douglas) | 17 to apply, 18 to register | High school diploma or GED; one year of algebra with a C, or placement scores. A GED math score of 150 from 2014 or later counts | None listed |
| Rogue Valley HVAC/R JATC | 18 | High school diploma or GED and one year of algebra with a C | No testing requirement; apprentices are selected from the pool at random |
| Klamath Basin HVAC JATC | 18 to apply | High school diploma or GED, and one year of algebra with a C or equivalent placement scores | None listed |
| SMART Local 16 (Sheet Metal Institute) | 18 | High school diploma or GED; placement test documentation with the application | Interview, then a ranked pool. Extra points: driver's license 5, military service with honorable discharge 15, recognized pre-apprenticeship program 20 |
| Central Oregon Sheet Metal JATC | 18 | High school diploma or GED; one year of algebra with a C, or equivalent placement scores | Names go on the list by date received |
| Mid-Valley Sheet Metal (Chemeketa) | 17 to apply, 18 to register | High school diploma or GED; one year of algebra with a C, or placement into MTH 070 or higher on Chemeketa's math placement test | One-hour orientation and online anti-harassment training |
| Sheet Metal JATC (ABC) | 17 | High school diploma or GED; one year of algebra with a C, or placement test results, or WorkKeys assessments | None listed |
| Mid-Valley Pipefitters (LBCC) | 18 in the standard; LBCC says you can be 17 to apply and 18 to start | High school diploma, GED or an associate degree or higher | No test required; WorkKeys assessments can add up to 21 points |
What HVAC apprentices earn in Oregon
Each program's state-registered standard sets apprentice pay as a percentage of the average journey-level wage of its employers. The date is when that journey wage took effect.
| Program | Journey wage (effective date) | Apprentice pay |
|---|---|---|
| UA Local 290: HVAC/R technician | $60.77 (April 1, 2025) | 40% rising to 90% over 10 periods of 800 hours |
| Area I HVAC JATC (ABC, Portland) | $50.53 (June 1, 2026) | 55% rising to 90% over 8 periods of 1,000 hours |
| Area III HVAC (Lane and Douglas) | $40.15 (July 1, 2026) | 55% rising to 80% over 8 periods of 1,000 hours |
| Mid-Valley HVAC JAC (Salem) | $39.69 (February 1, 2026) | 50% rising to 90% over 8 periods of 1,000 hours |
| Rogue Valley HVAC/R JATC | $35.00 (May 1, 2026) | 60% rising to 95% over 8 periods of 1,000 hours |
| Central Oregon Sheet Metal JATC | $39.24 (January 1, 2026) | 65% rising to 90% over 8 periods; minimum starting wage $25.50 |
| Mid-Valley Sheet Metal (Salem) | $37.36 (February 1, 2026) | 60% rising to 95% over 8 periods of 900 hours |
| Mid-Valley Pipefitters (LBCC) | $39.94 (January 1, 2026) | 45% rising to 80% over 8 periods of 1,000 hours |
Those are registered scales for each program's employers, not what every HVAC technician earns. Across experience levels, the median Oregon HVAC mechanic earns $30.26 an hour, about $62,940 a year (BLS, May 2025). Metro medians: Portland area $31.38, Salem $31.27, Bend $29.40, Eugene-Springfield $28.87, Medford $28.73, Albany $28.31. The Oregon median is $35.46 an hour for sheet metal workers and $46.66 for plumbers, pipefitters and steamfitters (BLS, May 2025). More on our Oregon HVAC pay page.
EPA 608 and licensing in Oregon
- EPA Section 608: federal rules (40 CFR Part 82, Subpart F) require technicians who maintain, service, repair or dispose of equipment that could release refrigerant to be certified. Registered apprentices are exempt while a certified technician closely and continually supervises them, but EPA's rule counts you as an apprentice for only two years from the date you first register (40 CFR 82.152, 82.161; EPA). You pass an EPA-approved test to get certified; our free EPA 608 practice tests cover the Core, Type I, II and III sections.
- Apprentice license: BOLI says it is illegal to work in a licensed trade without a valid apprentice license (Oregon BOLI).
- Limited Energy Technician Class B: the registered HVAC/R standards name this license as the one the apprenticeship leads to (Mid-Valley standard, UA Local 290 standard). Oregon's Building Codes Division (BCD) says the license covers limited energy electrical activity that does not include protective signaling. One way to qualify is to complete a board-approved apprenticeship program, and the exam is a 2-hour, 28-question open book exam (Oregon BCD). Chemeketa says graduates of the Mid-Valley program qualify for LE/B licensure and Brazing Industry certification (Chemeketa). See our Oregon licensing guide.
- Steamfitters: UA Local 290's steamfitter standard names the Boiler Class 5 Pressure Piping Mechanic license (standard). BCD lists a 3-hour, 52-question open book exam for it (Oregon BCD).
- Contracting on your own later: Oregon's Construction Contractors Board says that, generally, anyone who works for compensation in construction activity involving improvements to real property must be licensed, and its examples include heating and air conditioning (Oregon CCB). BCD also lists a Limited Maintenance Specialty Contractor HVAC/R license for companies (Oregon BCD).
How long it takes
- Apply when a program is taking applications. UA Local 290's standard says openings are announced at least 30 days before the earliest application date and that applications stay active for two years (standard).
- Work for a training employer and attend classes. Each of the seven HVAC/R standards for the programs above sets a term of 8,000 hours on the job. Chemeketa calls that a four-year program, with classes two nights a week (Chemeketa). The Mid-Valley standard requires at least 144 hours of related training a year (standard).
- At UA Local 290, apprentices complete 10 terms, 8,000 training hours and 1,080 school hours in total. A term is a minimum of six months (290 Tech).
- The Sheet Metal Institute describes five years, with 1,000 hours of classroom and lab instruction and 8,000 hours of on-the-job training (Sheet Metal Institute). The sheet metal standards at Central Oregon, Mid-Valley, ABC and South Central Oregon set 7,200 hours (Central Oregon's public notice says the committee requires 8,000 hours).
- Finish your hours. In licensed occupations, apprentices must complete the minimum required total hours before they are referred to the license exam (Area I standard). After BCD approves your application, it mails a letter of authorization that explains how to schedule the exam (Oregon BCD).
Next steps
- New to the trade? Read the national HVAC apprenticeship guide: routes, the aptitude test and apprentice pay.
- License rules: Oregon contractor and trade licensing.
- Pay after your apprenticeship: HVAC pay in Oregon.
- Get ready for the refrigerant exam: free EPA 608 practice tests.
- Other trade: electrician apprenticeships in Oregon.
Frequently asked questions
Which Oregon HVAC apprenticeships are taking applications now?
As of November 19, 2026, Central Oregon Sheet Metal JATC publishes a current window, November 1, 2026 to April 30, 2027; it is a sheet metal program. BOLI lists Area I HVAC JATC in Portland and Klamath Basin HVAC JATC as accepting applications, without dates. UA Local 290, the Sheet Metal Institute (SMART Local 16), Mid-Valley HVAC JAC and the Lane and Douglas county program are closed.
Do I need a license to work as an HVAC apprentice in Oregon?
BOLI says it is illegal to work in a licensed trade without a valid apprentice license. The registered HVAC/R standards name the Limited Energy Technician Class B license as the license the apprenticeship leads to. For refrigerant work, EPA exempts registered apprentices who are closely and continually supervised by a certified technician, for two years from the date they first register.
How long is an HVAC apprenticeship in Oregon?
Each of the seven HVAC/R standards for the programs in the table sets a term of 8,000 hours on the job. Chemeketa Community College describes the Mid-Valley program as a four-year program. At UA Local 290, apprentices complete 10 terms, and a term is a minimum of six months.
How old do you have to be, and what schooling do you need?
BOLI's baseline for HVAC/R is at least 17 to apply and 18 to begin, proof of high school graduation or a GED, and at least one year of algebra with a C. Committees may add their own requirements. Several programs, such as Area I HVAC JATC and Rogue Valley HVAC/R JATC, set the minimum age at 18.
Does it cost anything to apply?
UA Local 290 charges a $35 non-refundable application fee to qualified applicants before assessments, with a waiver for incomes below 150% of the federal poverty guidelines. We found no application fee published for the other programs in the table.
How much do HVAC apprentices make in Oregon?
Apprentice pay is a percentage of each program's journey wage. At UA Local 290 the journey wage is $60.77 an hour (April 1, 2025) and apprentices move from 40% to 90%. At Area I HVAC JATC it is $50.53 (June 1, 2026), with apprentices at 55% to 90%. The median Oregon HVAC mechanic earns $30.26 an hour (BLS, May 2025).
Sources
Oregon BOLI: apprenticeship opportunities; BOLI: HVAC/R technician programs; BOLI: environmental control system servicer/installer programs; BOLI: sheet metal worker programs; BOLI apprenticeship memo; BOLI program pages for UA Local 290, Area I HVAC, Mid-Valley HVAC, Area III HVAC, Rogue Valley HVAC/R, Klamath Basin HVAC, Portland Sheet Metal Workers, Central Oregon Sheet Metal, Mid-Valley Sheet Metal, Sheet Metal JATC, South Central Oregon Sheet Metal, Mid-Valley Steamfitters/Pipefitters, UA Local 598, Test, Adjust and Balance, IUOE Local 701; BOLI program standards for UA Local 290 HVAC/R, UA Local 290 steamfitter, Area I HVAC, Mid-Valley HVAC, Area III HVAC, Rogue Valley HVAC/R, Klamath Basin HVAC, Local 16 service systems technician, Local 16 sheet metal, Mid-Valley Sheet Metal, Sheet Metal JATC, Central Oregon Sheet Metal, South Central Oregon Sheet Metal, Mid-Valley Pipefitters, Test, Adjust and Balance, IUOE Local 701; 290 Tech: Oregon applicants; 290 Tech: Apprenticeship 101; Chemeketa: HVAC/R apprenticeship; Chemeketa: sheet metal apprenticeship; NW Apprenticeship Services; Area III JATC 3025; Central Oregon Sheet Metal JATC 7013; JATC 7013 public notice; JATC 7013 pool letter; Sheet Metal Institute: apply; Sheet Metal Institute: apprenticeship; Sheet Metal Institute: requirements; Linn-Benton Community College apprenticeships; Mid-Valley Steamfitters/Pipefitters application process; Oregon BCD: individual licenses; Oregon BCD: contractor licenses; Oregon BCD: apply for an electrical license; Oregon CCB: license; EPA: Section 608 technician certification; 40 CFR 82.161; U.S. Bureau of Labor Statistics OEWS, May 2025 (state and metro wages).
BIG WORKS is not affiliated with any union, contractor association, training program or government agency. Application windows and fees change; confirm with the program before you apply.
Last checked November 19, 2026.