HVAC apprenticeship · Michigan

HVAC Apprenticeship in Michigan: Where to Apply and When

Which Michigan HVAC, pipe trades and sheet metal apprenticeships are taking applications, when the others open, what each asks for, what HVAC mechanics earn, and how Michigan's mechanical contractor license works.

The short answer

The Michigan HVAC apprenticeships on this page are run by union training programs: eight pipe trades locals (UA), which train HVAC/R service technicians, pipefitters and plumbers, and two sheet metal locals (SMART). Two schools affiliated with ABC chapters teach HVACR classes in the evening. As of November 19, 2026, Sheet Metal Workers Local 80 in Warren takes applications by appointment and holds entrance exams in January and July (Local 80 Training Center). UA Local 111 in the Upper Peninsula says its HVAC/R service apprenticeship is currently accepting applications from people with a two-year associate degree or equivalent experience (UA Local 111). The other dated window is UA Local 370 in Flint, which says its next window will open January 2, 2027 and close March 31, 2027 (UA Local 370).

The UA programs that state a length describe a five-year apprenticeship, and Sheet Metal Workers Local 80 describes a 4-year program on its about page (Local 80). You work for a contractor and attend classes; UA Locals 190, 333, 85 and 370 each describe one class day every two weeks. Michigan's mechanical license is a contractor license: it takes at least 3 years or 6,000 hours of experience in a work classification before you can take that classification's exam (MCL 339.5807).

Where to apply in Michigan

Programs we could check on their own websites: pipe trades locals first, then sheet metal locals, then non-union schools. The status is what each site said on November 19, 2026, except UA Local 636, whose training site was down that day. Several sites still show 2026 dates; for those we give the pattern the site states, not a 2027 date. If your area is not listed, search the U.S. Department of Labor's apprenticeship finder.

ProgramAreaRouteApplications (as of November 19, 2026)Application fee
Pipefitting Industry Training Center, UA Local 636Southeast MichiganUnion (UA): pipefitter, steamfitter, HVAC service technicianClosed as of October 8, 2026. On that date its training site (pipefitters636tc.org) said the application period was closed and that it would begin accepting applications in December. The training site was down when we checked on November 19, 2026, so check it againNot published
Greater Michigan UA Local 190 JATCWashtenaw County and parts of Livingston and Lenawee counties (Ann Arbor area)Union (UA): plumber and pipefitterClosed. Its site says it is not accepting HVAC apprentices at this time (Local 190 FAQ). The plumber and pipefitter recruitment window typically runs from January 1 through January 31 each year; 2027 dates are not posted$75, non-refundable
UA Local 174 (plumbers, fitters and service trades)West Michigan; office in CoopersvilleUnion (UA): plumber, fitter, service tradesClosed. Its site says it accepts applications every February; the date on the page is out of date (it still says February 2026). An information sheet is online, and the site says it will email you when applications begin. The site says that sheet is not an application formNot published
UA Local 333 (plumbers, pipefitters, HVAC mechanics)Lansing, Jackson, Battle CreekUnion (UA): plumber, pipefitter, HVAC serviceCheck site; application form is online, no window statedNot published
UA Local 85 JATC (plumbers, steamfitters, HVACR service techs)Saginaw; a list of counties on its site that includes Saginaw, Bay, Midland, Alpena and Grand TraverseUnion (UA): plumber, steamfitter, HVACR serviceCheck site; application form is online, no window stated. A separate HVACR service application is linkedNot published
UA Local 370 (plumbers, pipefitters, steamfitters, service technicians)Flint; Genesee, Shiawassee and Lapeer countiesUnion (UA): plumber, pipefitter, sprinkler fitter, HVACR technicianClosed. Its site says the next application window will open January 2, 2027 and close March 31, 2027Not published
U.P. Plumbers, Pipefitters and HVACR Technicians, UA Local 111Upper Peninsula and Niagara, Wisconsin; offices in Escanaba and MarquetteUnion (UA): HVAC/R service, plumber and pipefitterHVAC/R service: Its site says it is currently accepting applications. Applicants must have a two-year associate degree or equivalent experience, and the page gives the training coordinator's phone number, (906) 789-9784 ext. 3. Plumber and pipefitter: its site says applications are not currently being accepted$24 WorkKeys testing fee (plumber and pipefitter route); HVAC/R route not published
Plumbers and Pipefitters HVAC Service Local 357 JACAllegan, Barry, Berrien, Cass, Kalamazoo, St. Joseph and Van Buren counties; office in SchoolcraftUnion (UA): plumber, pipefitter, welder, HVAC-refrigerationCheck site. Its home page still shows the 2026 window (applications picked up in person in Schoolcraft from February 2, 2026; packages due February 27, 2026); 2027 dates are not posted. An online application page is also on the site, with no window statedNot published
Sheet Metal Workers Local 80 Training CenterDetroit area; training center in WarrenUnion (SMART): sheet metal, HVAC service, testing and balancingOpen now: applications are taken in person, Monday to Friday by appointment; call (586) 979-5190. Entrance exams are held the 4th Wednesday in January and July, and the deadline to apply is the Friday before the exam$40 cash testing fee, non-refundable
SMART Sheet Metal Workers Local 7Office in Lansing; its form lists work areas from Lansing/Jackson and Grand Rapids/Muskegon to Traverse City and the Upper PeninsulaUnion (SMART): sheet metalCheck site. An online inquiry form is linked; the form calls itself a preliminary step and says a representative will contact you. No window statedNot published
Southeast Michigan Construction Academy (SEMCA), HVACR programSterling Heights and WestlandNon-union school (ABC)Check site. A trade school program with evening classes (6:30 to 9 p.m., Mon/Wed or Tues/Thurs); the 2026–27 year runs August 31, 2026 to May 13, 2027. An application link is online, no deadline statedNot published
Greater Michigan Construction Academy (GMCA), HVACR programABC Greater Michigan Chapter; chapter office in MidlandNon-union school (ABC)Its site says the enrollment form is open. It says fall classes start the first full week of August and the deadline is 3 weeks prior; it does not state the year. Students attend class one night a weekApplication fee not published. Tuition is $2,204 per semester per program, plus books (about $70 to $265) and a lab fee (about $25 to $200)

Requirements at Michigan HVAC programs

Each program sets its own rules. What their pages state:

ProgramMinimum ageTestOther
UA Local 636 (Southeast Michigan)Not statedAs of October 8, 2026, its training site linked test prep for WorkKeys and the Wiesen Test of Mechanical Aptitude—
UA Local 190 (Ann Arbor)Not statedWorkKeys in four subjects: Applied Math, Workplace Documents, Workplace Observation and Applied Technology. Cumulative score of 17 or higher (one line on the page says 15). No retakeHigh school diploma or GED; valid driving license; drug test; background check
UA Local 333 (Lansing)18You submit ACT WorkKeys scores for Workplace Documents, Applied Mathematics and Graphic Literacy: at least 4 in each and at least 14 in totalBirth certificate; high school diploma or GED; high school transcript; driver's license
UA Local 85 (Saginaw)18 at applicationA scheduled general knowledge aptitude examinationU.S. citizen; live in the local's area; high school diploma or GED; valid Michigan driver's license and dependable transportation
UA Local 370 (Flint)Not statedWorkKeys: Workplace Documents, Graphic Literacy and Applied MathHigh school diploma or GED; driver's license; proof of residency in Genesee, Shiawassee or Lapeer County; drug test if selected; interview after the window closes
UA Local 111 (Upper Peninsula)17 to apply; 18 with a high school diploma or equivalent to enterPlumber and pipefitter route: three WorkKeys exams, with a combined average of Level 5.33 and an average of 80% correct to qualify for an interviewHVAC/R service route: two-year associate degree or equivalent experience. Drug and alcohol screening
UA Local 357 (Schoolcraft)18 with a high school diploma or GED, or 17 and a senior on track to graduateIn-person, computer-based assessment of about 60 to 90 minutesWilling to work full time anywhere in its seven counties and attend classes in Schoolcraft; background investigation
SMART Local 80 (Warren)Not statedBennett Mechanical Comprehension Test and three ACT WorkKeys assessments: Applied Math, Workplace Documents and Graphic Literacy. Your score stays active for two yearsHigh school diploma or GED and a valid driver's license, shown when you apply

What HVAC apprentices earn in Michigan

Union apprentices are paid a share of the journeyman rate that rises as they progress. UA Local 333 says apprentices start at 45% of journeyman scale, with raises every 6 months if program requirements are met (UA Local 333). UA Local 85 says pay is a percentage of the journeyman rate with a 5% raise every 6 months if all requirements are met (UA Local 85). UA Local 370 and UA Local 111 also describe increases every six months. Local 333 and Sheet Metal Workers Local 80 say apprentices are paid their hourly wage for school days.

We found no current, dated dollar scale on these programs' sites. The latest wage sheet posted by Sheet Metal Workers Local 80 covers June 2, 2025 to May 31, 2026, so we have not quoted it (Local 80 wages).

For a sense of pay across the trade: the median Michigan HVAC mechanic, at any experience level, earns $29.26 an hour, about $60,850 a year (BLS, May 2025). Metro medians:

Metro areaMedian hourly wageMedian annual wage
Ann Arbor$36.06$75,000
Detroit-Warren-Dearborn$30.37$63,170
Kalamazoo-Portage$29.46$61,270
Lansing-East Lansing$29.06$60,440
Grand Rapids-Wyoming-Kentwood$28.94$60,190
Flint$28.79$59,870

More on our Michigan HVAC pay page.

EPA 608 and licensing in Michigan

  • EPA Section 608: federal rules (40 CFR Part 82, Subpart F) require technicians who maintain, service, repair or dispose of equipment that could release refrigerant to be certified. Registered apprentices are exempt while a certified technician closely and continually supervises them, and EPA's rule counts you as an apprentice for two years from the date you first register (40 CFR 82.152, 82.161; EPA). You pass an EPA-approved test to get certified; our free EPA 608 practice tests cover the Core, Type I, II and III sections.
  • State license: Michigan licenses mechanical contractors. LARA says licensed mechanical contractors can perform installations, alterations and servicing, and secure permits. Its work classifications include HVAC equipment, ductwork, refrigeration, and hydronic heating and cooling and process piping (Michigan LARA).
  • Experience for the contractor license: at least 3 years or 6,000 hours in the work classification you apply for, shown by a signed statement from each mechanical contractor you worked for. You take an exam for each classification; the exams are run by PSI (MCL 339.5807; LARA).
  • Credit for school: a completed 2-year HVAC program at a recognized trade school, community college or university, or a 2-year HVAC training program approved by the U.S. Department of Labor, can count for up to 1 year or 2,000 hours of that experience (MCL 339.5807).
  • Apprentices and technicians: LARA's mechanical licensing page lists the mechanical contractor license, its application and its exams. On that page and in the section titles of Article 8 of the Skilled Trades Regulation Act, we found no state license or registration for HVAC apprentices or journey-level technicians. We could not read the full text of every section, so confirm with LARA. See our Michigan licensing guide.
  • Boilers: boiler installers and boiler repairers hold separate state licenses (LARA boiler licensing).

How long it takes

  1. Apply when a program's window is open, then pass its test and interview. The windows are in the table above.
  2. Work for a contractor and attend classes. UA Locals 190, 333, 85 and 370 each describe a five-year apprenticeship, and UA Local 636 calls its program a tuition-free, five-year apprenticeship registered with the U.S. Department of Labor (UA Local 636). UA Local 370 lists 8,500 to 10,000 hours of on-the-job training and at least 246 hours of classroom instruction a year, with an eight-hour class every two weeks (UA Local 370). At UA Local 85, the first year is probationary and classes are one day every other week in Saginaw or Traverse City (UA Local 85).
  3. In the Upper Peninsula, UA Local 111's plumber and pipefitter apprenticeship is five years with 216 hours of classroom training each year. Its page does not state the length of the HVAC/R service program (UA Local 111).
  4. On the sheet metal side, Sheet Metal Workers Local 80's about page describes a 4-year program that covers sheet metal fabrication and installation, welding, HVAC system design, HVAC service and HVAC testing, adjusting and balancing. A flyer on the same site says 5-year, so ask the training center (Local 80).
  5. At the non-union schools, SEMCA describes a 2 or 4 year HVACR program, and GMCA's HVACR Level I is one semester of 72 class hours (SEMCA, GMCA).
  6. To run your own jobs later, the mechanical contractor license takes at least 3 years or 6,000 hours of experience in a work classification, plus that classification's exam (MCL 339.5807).

Next steps

Frequently asked questions

Which Michigan HVAC apprenticeships are taking applications now?

As of November 19, 2026, Sheet Metal Workers Local 80 in Warren takes applications in person, Monday to Friday by appointment, with entrance exams on the 4th Wednesday in January and July. UA Local 111 in the Upper Peninsula says its HVAC/R service apprenticeship is currently accepting applications; applicants must have a two-year associate degree or equivalent experience. UA Local 333 and UA Local 85 have application forms online with no window stated.

When do Michigan HVAC apprenticeship applications open?

UA Local 370 in Flint says its next application window will open January 2, 2027 and close March 31, 2027. UA Local 174 in West Michigan says it accepts applications every February. UA Local 357's 2026 window ran February 2 to February 27, 2026, and its 2027 dates are not posted. UA Local 636's training site said on October 8, 2026 that it would begin accepting applications in December.

How long is an HVAC apprenticeship in Michigan?

UA Locals 636, 190, 333, 85 and 370 each describe a five-year apprenticeship. Sheet Metal Workers Local 80's about page describes a 4-year program. UA Locals 190, 333, 85 and 370 each describe one class day every two weeks while you work for a contractor.

How much do HVAC apprentices make in Michigan?

Union apprentices are paid a share of the journeyman rate. UA Local 333 says apprentices start at 45% of journeyman scale with raises every 6 months if program requirements are met, and UA Local 85 describes a 5% raise every 6 months if all requirements are met. For comparison, the median Michigan HVAC mechanic, at any experience level, earns $29.26 an hour, about $60,850 a year (BLS, May 2025).

Do HVAC apprentices need EPA 608 certification?

Not at first. EPA exempts registered apprentices who are closely and continually supervised by a certified technician, for two years from the date they first register as an apprentice. After that, or to work unsupervised, you must pass an EPA-approved test and hold Section 608 certification.

Do you need a license to work in HVAC in Michigan?

Michigan licenses mechanical contractors. The contractor license takes at least 3 years or 6,000 hours of experience in a work classification, plus an exam for each classification. We found no state license or registration for HVAC apprentices or journey-level technicians on LARA's mechanical licensing page.

Sources

UA Local 636; UA Local 190: application; UA Local 190: FAQ; UA Local 174; UA Local 333; UA Local 333 application form; UA Local 85; UA Local 370; UA Local 111; UA Local 357; UA Local 357: apprenticeship program; Sheet Metal Workers Local 80 Training Center; Local 80: apprenticeship; Local 80: about; Local 80: wages; SMART Local 7; SEMCA: HVACR; ABC Southeastern Michigan: training; GMCA: registration; GMCA: curriculum; ABC Greater Michigan Chapter: training; Michigan LARA: mechanical licensing; Michigan LARA: boiler licensing; MCL 339.5807; 40 CFR 82.161; EPA: Section 608 technician certification; apprenticeship.gov finder; U.S. Bureau of Labor Statistics OEWS, May 2025 (state and metro wages).

BIG WORKS is not affiliated with any union, contractor association, training program or government agency. Application windows and fees change; confirm with the program before you apply.

Last checked November 19, 2026.